EggRider C1 Bluetooth Smart eBike Display
Unlock your eBike’s true performance. The EggRider C1 is a vibrant, full-color display upgrade that replaces restrictive factory monitors. Blending a crisp, 2-inch weather-resistant dashboard with Bluetooth mobile app tracking, it gives you deep data analytics and instant performance toggles right at your handlebars.
Key Features
Vibrant 2-Inch Color Dashboard: High-contrast, animated graphics ensure perfect readability in glaring sun or severe weather.
On-Demand Performance Profiles: Instantly toggle between a street-legal Road mode and an unrestricted Off-Road profile with a single click.
Dual-Unit Design: Features a central dashboard and a dedicated, sleek handlebar remote for ergonomic navigation while riding.
Deep Telemetry Analytics: Monitor battery health, real-time power draw, energy efficiency, and trip histories via the mobile companion app.
Advanced Battery Tracking: Monitor voltage profiles, true capacity, and historical usage for up to three unique battery setups.
Technical Specifications
Display Dimensions: 47.4 mm × 64.2 mm × 29.7 mm
System Voltage Support: Native direct voltage handling from 20V up to 60V (52V nominal max) Works with 72v (max 84v) on all HV products!
Environmental Protection: IP65 dust and water-resistant casing
Handlebar Compatibility: 31.8 mm primary clamp (includes custom 22.2 mm reducing spacer)
Connectivity: Bluetooth Low Energy (BLE)
Wiring Harness: Waterproof 5-Pin Higo/Julet Female connector BBSHD Pinout
Controller & Motor Compatibility
This display operates on UART protocols. It features native out-of-the-box compatibility with: [1]
Bafang Mid-Drives & Hub Motors: BBS01, BBS02, BBSHD, Ultra M620, M600
Rad Power Bikes: Select models (requires custom Rad-specific adapter cable)
Aftermarket Controllers: Kunteng (KT), Lishui (LSW), and ASI BAC series
Note: Not natively compatible with CAN bus systems without dedicated hardware variants.
All HV Products!
EggRider C1 Bluetooth Smart eBike Display
Unlock your eBike’s true performance. The EggRider C1 is a vibrant, full-color display upgrade that replaces restrictive factory monitors. Blending a crisp, 2-inch weather-resistant dashboard with Bluetooth mobile app tracking, it gives you deep data analytics and instant performance toggles right at your handlebars.
Key Features
Vibrant 2-Inch Color Dashboard: High-contrast, animated graphics ensure perfect readability in glaring sun or severe weather.
On-Demand Performance Profiles: Instantly toggle between a street-legal Road mode and an unrestricted Off-Road profile with a single click.
Dual-Unit Design: Features a central dashboard and a dedicated, sleek handlebar remote for ergonomic navigation while riding.
Deep Telemetry Analytics: Monitor battery health, real-time power draw, energy efficiency, and trip histories via the mobile companion app.
Advanced Battery Tracking: Monitor voltage profiles, true capacity, and historical usage for up to three unique battery setups.
Technical Specifications
Display Dimensions: 47.4 mm × 64.2 mm × 29.7 mm
System Voltage Support: Native direct voltage handling from 20V up to 60V (52V nominal max) Works with 72v (max 84v) on all HV products!
Environmental Protection: IP65 dust and water-resistant casing
Handlebar Compatibility: 31.8 mm primary clamp (includes custom 22.2 mm reducing spacer)
Connectivity: Bluetooth Low Energy (BLE)
Wiring Harness: Waterproof 5-Pin Higo/Julet Female connector BBSHD Pinout
Controller & Motor Compatibility
This display operates on UART protocols. It features native out-of-the-box compatibility with: [1]
Bafang Mid-Drives & Hub Motors: BBS01, BBS02, BBSHD, Ultra M620, M600
Rad Power Bikes: Select models (requires custom Rad-specific adapter cable)
Aftermarket Controllers: Kunteng (KT), Lishui (LSW), and ASI BAC series
Note: Not natively compatible with CAN bus systems without dedicated hardware variants.
All HV Products!
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5