BBSHD sprocket adapter. Use Bafang front sprockets on the rear!
The adapter allows the use of any chainring or spider using the Bafang 5 bolt pattern to be used on the rear cassette for a strong single speed setup with a high number of teeth. This is very much aimed at people using the High Voltage upgrade kit for BBSHD looking to get that golden 1:1 ratio for the best balance of Speed, acceleration and climbing ability.
The adapter has been machined in Aluminum, anodized and engraved at a local facility on Vancouver Island. It has been tested on our Big Hit build.
The spacer is available stand alone and also with a set of spacers to let you position it on the splines of the rear hub.
If you have any questions on the spacer you can use the form at the bottom of the page or send an email to John.
Torque Spec for M5 Bolts is 61 in lbs or 6.9 nm. Recommend using blue Locktite on the threads!
Please ensure that checking these bolts is part of your checks you perform regularly on your bike as part of a standard pre trick inspection of your drive train and other critical areas.
** Please Note, Not for Sram XD or the new microspline **
The adapter allows the use of any chainring or spider using the Bafang 5 bolt pattern to be used on the rear cassette for a strong single speed setup with a high number of teeth. This is very much aimed at people using the High Voltage upgrade kit for BBSHD looking to get that golden 1:1 ratio for the best balance of Speed, acceleration and climbing ability.
The adapter has been machined in Aluminum, anodized and engraved at a local facility on Vancouver Island. It has been tested on our Big Hit build.
The spacer is available stand alone and also with a set of spacers to let you position it on the splines of the rear hub.
If you have any questions on the spacer you can use the form at the bottom of the page or send an email to John.
Torque Spec for M5 Bolts is 61 in lbs or 6.9 nm. Recommend using blue Locktite on the threads!
Please ensure that checking these bolts is part of your checks you perform regularly on your bike as part of a standard pre trick inspection of your drive train and other critical areas.
** Please Note, Not for Sram XD or the new microspline **
The adapter allows the use of any chainring or spider using the Bafang 5 bolt pattern to be used on the rear cassette for a strong single speed setup with a high number of teeth. This is very much aimed at people using the High Voltage upgrade kit for BBSHD looking to get that golden 1:1 ratio for the best balance of Speed, acceleration and climbing ability.
The adapter has been machined in Aluminum, anodized and engraved at a local facility on Vancouver Island. It has been tested on our Big Hit build.
The spacer is available stand alone and also with a set of spacers to let you position it on the splines of the rear hub.
If you have any questions on the spacer you can use the form at the bottom of the page or send an email to John.
Torque Spec for M5 Bolts is 61 in lbs or 6.9 nm. Recommend using blue Locktite on the threads!
Please ensure that checking these bolts is part of your checks you perform regularly on your bike as part of a standard pre trick inspection of your drive train and other critical areas.
** Please Note, Not for Sram XD or the new microspline **